No announcement yet.

Looking for Shurflo washdown pump...?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for Shurflo washdown pump...?

    Does anyone know where I can get a Shurflo washdown pump at a good price? Ebay has them around $85. Just thought I'd ask here before buying one. It's going to be a replacement for a freshwater washdown setup.

    I pulled this one out of my buddy's 1988 Wellcraft 230 Coastal this afternoon. Can't even read the model number on the label, but it's marked "Open Flow 2.8" and "GPM 11.0", and has a manufacturing date of 2/87. Yes, it was original equipment.

    Thanks in advance for any help!


    1988 171 Standard - new to me 1995 Johnson 115hp[br]1973 17 Standard - STILL looking for a nice used engine for this hull![br]\"You\'re gonna need a bigger boat.\"[br]Providence River Boat Company[br][br]M/V Proud Mary[br]28\' Sylvan Supreme/90HP Evinrude Etec (tour/charter boat)[br]Providence, RI[br]Become a fan of the Providence River Boat Company on Facebook![br]

  • #2
    This place has them for 69.95 call for specs. look in the washdown pump section. dave
    [br]1994 Mako 215 Dual console Optimax 225[br]1978 Mako 19 with 90hp johnson[br]1996 Mako 22[br]1982 Mako 171 Angler 135 Black Max Mercury[br]1987 21b 225 Yamaha[br]1974 23 inboard Gusto gone.[br]1979m21 225johnson \"blue dolphin\" bought off this board and restored [br]with everyone\'s help!!Gone but not Forgotten....[br]1979 20 Mako 115 Suzuki gone[br]1977 19 Mako 115 Johnson gone[br]1976 23 Mako twin 140 Johnsons gone[br]1983 224 with closed transom and bracket[br]And 162 SOB (some other boats)[br]Venice Florida, Traverse city Mi.


    • #3
      More expensive than the Shurflow... but you might also want to look at the Groco pumps. They are top of the line...
      Capt Kevin ~~~><((((*>[br][br] 2520 MVSC \"Chesapeake Edition\"[br]Annapolis, Maryland[br]


      • #4
        The Groco is the Top Dog, but the Jabsco parmax 3 or 4 is a much better choice than the Surflow.

        Outdoor Superstore sold out of the Parmax 3's. I bought one for Hammertime's boat and one for my boat. They still have the Parmax 4's.


        • #5
          My Jabsco par max 4 already went out on me. When you install it motor up, the wires connections are at the bottom, and the little cup that is supposed to protect them fills with water. Well, connections aren't shrink wrapped or anything. So it rusted through and broke off in no time. I pulled it and figured out the problem, reconnected it, shrink wrapped the connections and then hit it with some corrosion x heavy duty. I then drilled a couple of holes in the bottom of that "cup" so that water would not sit in there.

          Other than that I love the pump, pretty high pressure. It is one of my favorite additions to the boat. Very convenient, and I can switch between raw and fresh water.
          1975 23\' Tampa,FL